iMapper Racer 3

The solution for reliable laser measurements

Focus on what matters most: your customers. Place the iMapper in the room to be measured, press the power button, continue discussing the project with your customer. In less than three minutes, even the most cluttered room will be measured.

85%

Boost your supply chain efficiency by up to 85%, streamlining operations with precision.

60%

Clients using imapper see a 60% average drop in supply chain emissions, advancing sustainability goals.

40%

Imapper’s algorithms on average cut supply chain costs by 40%, merging sustainability with savings.

Step 1

Switch on iMapper in the middle of the room with 1 click

Place the iMapper in the center and after 1 click, while it is measuring, you can concentrate on the customer:

Anyone can map any room in 2 minutes, no matter how complex
Capture horizontal and vertical measurements
with ±2 mm accuracy
10 wide-angle photos (360 degrees)
are taken automatically

Book a Demo

±2mm precision, 30m range

Reach a ±2 millimeters precision with a range of 30m indoors and 20m outdoors thanks to its laser sensor (1200 points per minute).

10 photos at 360° for every scan

iMapper automatically takes photo documentation so you can see where each measurement was taken.

Rotate iMapper to take vertical cuts

You can measure the height of any room, angles of ceilings or even stairs by rotating iMapper 90° on the tripod.

Step 2

Upload the scans and store all details securely

After taking the measurements upload the point clouds from the SD card on the platform in 10 seconds, they will now be stored securely so you won’t ever lose them:

Load points onto the platform in just 5 seconds
Join as many rooms as you like, no limits
Generate an editable floor plan (walls) in 15 seconds
Access to the platform in the cloud, without the need for powerful PCs

Book a Demo

You can manually correct the generated floor plan before exporting into your drafting software.

Book a Demo

Step 3

Take accurate measurements and analyze any detail

The point clouds is so dense that you can:

Spot small details like door moulding, stone walls and structural inflections
Measure the thickness of the walls and also the angles of the room
Measure or draw surfaces accurately between any points in the cloud
Measure the exact m² and m³ of every room with the digital area tool

Book a Demo

Snapping points are identified for you

The corners of the rooms measured from the iMapper become snapping points to take quick and reliable measurements.

Measure the exact m² of every room

You can use our digital area tool or our digital meter tool to take any measurement.

See where each point was taken

In iMapper's platform, you can see exactly where any measurement was taken thanks to the association with the images.

Step 4

Quickly export measurements from iMapper's platform into your preferred drawing software

Once all adjustments have been made on the iMapper platform, export the floor plan with it's points and lines to various file formats (e.g. DXF) and import them into your preferred drawing software to refine or modify the floor plan:

Export the point clouds in the unit of your choice (metric or imperial)
Export the lines to eliminate shadow cones
You can start working immediately without the risk of errors occurring

Bonus tip: With iMapper Studio, you can even have the floor plan created by one of our drafting experts.

Book a Demo

Step 5

Keep all your projects organized, create quotes faster and share them with project collaborators

You will be able to share the project with all involved project collaborators:

Share unlimited projects in 1 click (no login required)
All your scans are on a secure cloud, accessible from anywhere
The license of an iMapper platform allows several users to log in and work at the same time.

Book a Demo

This is one of the tools that I no longer live without.

Dimitri Bodiansky latelier-des-batisseurs

‍You have to try it out, and after an initial survey, you're bound to be convinced.

Hugo Metzger MH Conception

I think the big advantage is to standardize the way we take the dimensions.

Bertrand Defache Schmidt Lens

iMapper provides an accurate floor plan, especially for older homes.

Dimitri Tsvetkov tsvetkov-architecture

The iMapper has totally changed the surveying session and the customer encounter.

Sylvain Raillard Inée Architecte

My measurements are correct even on old buildings that do not have a straight wall. The iMapper is autonomous and very accurate.

Florian Prado florian-prado-dessin-en-batiment

The iMapper is easy to use, even for people like me who are harder to train than young people

Albert Dubler atelier-darchitecte-albert-dubler

iMapper, on one hand, saves time; on the other, it offers precision and safety.

David Kotzebue schreinerei-in-der-walzmuehle

The iMapper's ability to quickly scan a part is very impressive.

Anthony Poirier plan-didees

iMapper allowed us to gain efficiency and optimize our time on site.

Emeline Dussaucy & Thomas Régent studiozero

I had a lot of doubt about the iMapper, but today, I've told my team to use almost exclusively the mapper because I'm so convinced of its reliability and what it can do for the quality of my shops.

Mathieu Herbaut Schmidt Cambrais

Uncertainty over measurements is a source of anxiety. Thanks to iMapper, this stress has been completely eliminated.

Pélagie Béllity BLTY Design

The iMapper solution today is incomparable to anything else on the market

Pascal Belot Noia immobilier

iMapper is an interesting tool that offers high performance compared to expensive laser measurement devices.

Peter Lang Holztreppen

iMapper on one hand can save you time, and on the other it offers precision and certainty

Axel Beem personal-architecture

If you work in interior design, renovation or as an architect it is really an easy and comfortable tool that saves you time for taking measurements.

Nicolas Hamon adebeo

"Now, when I return from a customer meeting, I'm sure I've got a fair and reliable floor plan."

Thomas Mimi Kaizo Studio

Scanning with the iMapper gives us much more precision on the dimensions. There is no longer any risk of error. Now we have accurate drawings.

Marie Bozzi & Anne-Laure Tinturier Bozzi Architecture

Customer Spotlight

View all

“If you've used a laser measurer or tape measure in the past and trust these tools, you can rely on iMapper to do the job all by itself.”

Thomas Mimi

Founder Kaizo Studio

Achieve precision

Millimeter accuracy with an average of over 1200 point clouds per minute and ten photos at 360 degrees. One click of the start button is all it takes to measure a room. Best of all, you can chat with your client while iMapper is working for you.

No need to move any furniture

iMapper also works perfectly in cluttered rooms. Simply position it so that shadow cones are reduced and even the most angled rooms are measured perfectly with an accuracy of ±2 mm.

Take your floor plans anywhere

Upload the point clouds to our platform and merge the different rooms with our automatic algorithm.
Then export the point clouds in various file formats and import them into your usual drafting software to draft your floor plans.

Change the way you take and see measurements

Book a free iMapper demo (~15 min) with one of our experts!

→ You will discover how iMapper works
→ You will see how to conduct measured surveys with iMapper in just a few minutes
→ We will answer all your doubts and questions

You will see iMapper in operation without obligation.

Frequently asked questions

How does the 30-day zero risk trial work?

The proof of the pudding is in the eating, not in the chef's promises! If you think iMapper can help you, it's best to try it out. To test the integration of iMapper into your work process, we have created a zero-risk offer: for 30 days upon receipt, you will have free access to the platform with unlimited point clouds that you can upload. If you are not satisfied with iMapper, you can send it back to us: you will receive a full refund and we cover the shipping costs.
At the end of the day, the cost for you: 0€.
Cost for us: some money, but it's very rare that someone wants to send the iMapper back.

Is iMapper worth it?

According to our users, yes. They love it because it saves them a boring and unprofitable part of their job. Plus, it's much less stressful and tiring to take measurements with the iMapper than doing it manually.
‍

You probably replaced your drawing board with AutoCAD/ArchiCAD/Revit/SketchUp twenty years ago.

Today, measuring by hand building is still extremely expensive in terms of human time (from one to ten half day per project on average). The cost for a small architectural firm is around €15,000 per year.

In concrete terms, iMapper allows a company to save time in 3 areas :
1. When taking measurements. It's much faster and the iMapper is autonomous. While it is operating, you can talk to your client.
2. When drafting the floor plan, which is accelerated by our semi-automated floorplan generation feature and done like "colouring", without hesitation or transfer of manual measurements to the computer.
3. Eliminating measurement uncertainties that would require a return to the site, or worse, errors that can significantly delay the project schedule.

Having high quality measurement in input make all the workflow of any company much smoother, from conception to customer support.

Is the iMapper guaranteed?

Yes, all iMappers come with a two-year warranty.

Can I pay in installments?

Yes, you can pay the iMapper hardware package in 3 interest-free installments. Contact us by email: hello@imapper.tech

How does it work?

Find all the answers to your technical questions on the FAQ page. You can also make an appointment with one of our experts here and ask all your questions in person.